Reference: SP181118
Modification of a Swapp Barier mechanical module
Modification of a Swapp Barier mechanical module with 2 cylinders without orange support plateThe original part is required
No brand
Best seller
No products at this time.
Divers
Reference: SP181214
Modification of a Swapp Barier mechanical module
Modification of a Swapp Barier mechanical module without the 2 cylinders and the orange support plateThe original part is required
Reference: SPOPP5948
Conception et fabrication d'un banc de test pour Blocs Valves
Design and manufacture of a test bench for valve blocks
Reference: ZSJ9SPG1855
Remis en état Machine de compression de bouteille AGR
Refurbishment of AGR cylinder compression machine including :- Recovery of the machine from site- Survey of existing system- Cleaning- Replacement of control valve- Replacement of water supply tube- Small supplies (magnets, fixings, etc.)- 110Vac test of motor and compression shafts- Leak check of the filling and return water- Delivery to Vergèze site
Reference: ZSJ9SPG1867
Table de comptage 6x5 (compteurs fournis)
Counting table 6x5 (counters supplied)
Reference: BMR-BT1
Test bench
Test bench for 5x standard valves and 2x EMHART proportional valves with current control allowing the control and visualisation in real time of the pressure variation according to the current applied.It includes :- Chassis with test table maximum width 140cm maximum depth 80cm maximum on castors and bases- Generator, transformer- Electric box with...
Reference: BMR-BT5
Test bench
Test bench for 5x standard valves (I34, MK55, Mac 45, 11SAD, BV26)It includes :- Chassis with test table maximum width 120cm maximum depth 80cm maximum on castors and base plates- Generator, transformer- Electric box with emergency stop- 80mm diameter cylinder with 200mm stroke- Pressure sensor with display- Pressure and cut-off valve- Oscilloscope
Reference: BMR-BT7
Test bench
Test bench for 5x standard valves and 2x EMHART proportional valves with current control allowing the control and visualisation in real time of the pressure variation according to the current applied.It includes :- Chassis with test table maximum width 140cm maximum depth 80cm maximum on castors and bases- Generator, transformer- Electric box with...
Reference: BMR-CHARPMAN
Charpy Impact test machine
Mechanical Charpy Impact test machine for glass container testingImpact speed : 35Inch Per Second5 in 5 IPS increments up to 120 with a minimum of 10Adjustable bottle height for impact testing at friction zones with 3mm screw thread for quick manual set upMinimum impact height of 10mm possibleContainer rotation by the operator